Airsoft Gun Review

For more information and special deals related to any of the issues on this page, place your cursor over the double-underlined links. All information supplied by Kontera.com.

USING THE 789A CHARGER

1. Select the input Voltage at the bottom. (e.g. US should use 110V, U.K. should use 220V)

2. Select the DC output voltage same as your battery pack’s voltage.

3. Select the proper charging current. Generally, higher current shortens the charging time but makes the battery pack far from actual fully charged. UNC recomments that use 2.0 mAH or above to charge the battery pack.

4. Plug the charger into A/C source without connecting any battery. The Red LED should light up.

5. Use correct connector with cord to connect the output to the battery.

6. When the battery is connected, the green LED should light up. If the LED doesn’t light up, the output voltage or current selector possibly not in position.

7. When the battery is charged, the green LED shoud light off.

8. Release the battery pack when it is charged.

Sanyo 8.4V 600mAH Ni-Cd BATTERY PACK CHARGING TEST

For more info visit : Airsoft Gun site- UNCompany.com
Source : UNCompany.com

Share This