Airsoft Gun Review

For more information and special deals related to any of the issues on this page, place your cursor over the double-underlined links. All information supplied by Kontera.com.

JG W733 (M733) Look and Feel Review
Review by: • well boy™ •

I just brought my JG W733 (M733) Commando yesterday. I decided to write a little review of it since wala pa siya talagang review dito. I know there’s nothing much to say kasi same lang sila nung JG na m16 w/c was reviewed by mastah rambo.

Anyway, for those who want to get a JG W733 and still are eager to read something about it, i hope this mini review can help.

Note :

This is just a “look and feel” review. Hindi ko pa binuksan sa loob kasi wala pa akong pagtanggal ng torx screw.

General

- Out of the box, nakabutas na ng bottom ng coke in can (center) [.2g bb]
- Fired in full auto, no missfeed at all. Very stable yung mga bb
- Plastic is not your ordinary ACM plastic. Iba ang plastic niya. Ma f-feel mo na matibay
- Six position butt stock
- Plastic hop
- Upper and lower recievers have no markings except for “safe” “semi” and “Auto”
- Forward assist is movable
- Hop is responsive
- Front sight is adjustable (comes with adjusting tool but it’s plastic)
- Magazine performs well
- Weight is decent. May kabigatan siya
- Wiring is decent
- Metal spring guide

Metal Parts

- Flash hider, Outer Barrel (extends up to the reciever)
- Triangle Sight (pati yung small part sa itaas)
- Charging Handle
- Dust cover
- Mag release, mag lock
- Lower trigger guard
- Rear sight, windage dial, elevation dial
- Butt tube
- Bolt catch
- Fire selector
- Delta ring (fixing ring?)
- Magazine (body and bottom)

The feel of this AEG is very solid. Very responsive and firm yung fire selector. Maririnig mo talaga yung *tick*. The flash hider can be removed also. Maganda rin yung sound kapag kinakasa. With regards to Marui, halos nakopya talaga ng JG. Before ko kasi binili ito, pinagmasdan ko muna ng husto yung marui ng teammate ko.

I tried to “peek” nga pla sa GB niya and I found out na metal yung spring guide niya. I can’t wait to tweak the GB na.

Still I can’t believe na ACM ito. Yung pagkaka assemble ay maganda, solid feel, wiring ok rin, plastic material and texture is good and most of all, young stock power niya ok na. Kulang na lang ng AEG na ito is real gun logo and stamps. With the price of P3,900.00, very sulit na. Out of the box pede mo na panglaro. CQB or Field. Ang mejo hassle lang sa AEG na ito is ang hirap tanggalin at ikabit yung mga handguard niya…

(Some pix)

“JG knows where to stamp! ”

“The mag has a hole for wind-up like tool. Instead na kamot, iniikot mo yung tool (see pic below)”

“I won’t use it anyway.”

“Wow, pogi ng stock na battery ahihihi”

“The metal outer barrel that extends hanggang sa reciever”
“Naka tape na lang yung wire and fuse. Tinanggal ko yung orig plastic lock nila”

Share This

Comments(5)

April 30(MONDAY) and May 1(TUES) ONLY.

FIREBASE AIRSOFT SHOP
Inside Bonsai Garden Cafe,
645 Severina Ave., KM 18, West Service road Paranaque city.
AEG’S:

JG M4-F P4,000
JG M733-F P3,900
JG S-System P4,900
A & K S-System P4,000
A & K CQB P3,900
JG Krinkov P3,400
JG Spetz P3,500
JG G36 P3,800
JG Mp5 SD6 P3,500
JG MP5 SD5 P3,500
JG Steyr Aug P3,900
Galaxy MP5 PDW P3,400
AGM M14 P4,400
AND MANY OTHER ACM AEG’s with big discounts!!

PARTS:

Deep fire titanium teeth – P1,300
Systema Hop Packing – P300
Area 1000 Bushings – P520
Systema Shims – P130
Marui EG 1000 – P1,900
Area Piston Body – P450
Systema All-Aluminum Piston Body – P1,200
and many more parts and accessories with low, low prices!!!

GEARS:

King Arms Knee Pads – P500
Bonnet with Neck Protector – P100
Sansei-type masks – P450
King Arms Gun Bags – P650
and many more gears with rock-bottom prices.

Scopes, chargers, batteries, supressors, flash hiders, gear box. tune-up kits, also with big price-slash!!!

No need to text or PM, just be there on April 30 and May 01. FIRST COME FIRST SERVED.  -

Nolan – 0917-534-2781

Share This

Comments(0)

Airsoft – JG M4A1-F
Review by: POWEE

JG M4A1-F package

internal pictures of JG M4

lower receiver with the gearbox

upper receiver with the folding butt

gearbox with plastic bushings

a look at the internal parts

Stock internal parts

guarder tapplet plate, SP140, systema type 2 cylinder, CA super torque up flat gears, SRC metal spring guide with bearing, SRC metal bushings, Deepfire half tooth piston and CA tight air seal nozzle.

gearbox with the newly installed upgrade parts

ready to rock JG M4A1-F

Poor Man’s Chrono…

Share This

Comments(4)

Airsoft – Galaxy MP5k PDW
Review by: RENEGADECOW

Some people are content in making their guns the prettiest and there are those who place function and reliability above all else. I belong to the latter group. In this review, I will be tackling problems met with the new china-clone AEG as I have personally experienced during a fun filled day of simulated combat. No out-of-the-box pizzazz in this review folks.

ROF kinda slow
Yes, I observed the ROF to be slow (high 700s) for something that shoots 326fps on an 8.4V battery. I opened it up, cleaned out the factory grease (which is absolutely horrible IMO), and re-shimmed the gears (factory shims consisted of 3 thick shims of equal thickness placed on each gear. Lots of play observed). Now, the gun shoots between 800~850rpm which is just right. In addition, I would like to list down the internals: CA marked gears (Same look as CA stock ratio gears, but as mentioned by my gunsmith friend Max, are not really CA, but are durable none-the-less), metal bushings, stock air nozzle, stock cylinder head, K/PDW type brass cylinder, stock piston body (color black), 8-hole ported piston head (color black), plastic hop chamber (color white), brass inner barrel, uniform pitch spring.

First drop
I packed the PDW in my violin case, excited about the fact that it fits. To put it simply, I opened the case in the most unstable of manners and the PDW flipped out and dropped on the ground. Although this case would be completely my fault in being stupid, I highly commend the PDW for getting but a small scratch on its side from the fall. Saving it from utter destruction would be its simplistic and relatively flat design. The unit had dropped on its side and the force was evenly distributed throughout the gun, and this was on the cocking lever side, which is the part that has the most protrusion. Also, unlike regular MP5s, the K and PDW have solid receivers and do not split into halves, making them more durable.

Second drop
The rear sling swivel broke off and the unit dropped (without magazine) under side first. All the damage dealt were scuff marks on both foregrip and pistol grip. No part removal, pin hole cracking or rattling observed whatsoever. I opened the sling swivel at home and found out why the part eventually gave way, which might strike the interest of similar users. The e-ring holding the swivel in place was not attached into the slot at all. It was simply shoved on the shaft of the swivel because the gap of the slot was too narrow for the locking device to go into. So instead, the e-ring acted more like an o-ring, which really will slip right off at the slightest amount of force. I remedied this problem by grinding down some material on the swivel so that the gap will accommodate the e-ring. Now, its working perfectly fine.

Third drop
I was running for cover when I slipped and dove head first upon stepping on a mass of bbs on the floor. I blame my Chuck Taylors on this one. I scraped my knee bleeding, tore my jeans, and bruised my hand. Well, nothing much happened to the PDW except for a few scuff marks on the tip of the flash hider. Again, the slim profile of the gun, together with it being light weight keeps it from sustaining any heavy damage. I wish I could say the same with my knee which is still oozing plasma up until now.

Conclusion
The gun took a beating, maybe even too much given that all of this happened in one game day. But it didn’t break and just kept on running, even longer than I myself was willing to play. Ergonomics is simply superb and build material robust despite the “made in china” stigma.

Out of the box, the high-cap mag (TM copy) misfed 1 in every 10 rounds, which was bad. But the short mag didn’t which meant that the high-cap was the problem. I opened it up and gave it a generous spray of silicon oil and now its ok. I even tried sticking a 9.6V battery on and didn’t misfeed at roughly 900rpm. Although Neslie, my supplier warned me about using a li-ion stick type battery as it misfed like crazy when he tried it himself. But it may have just been the non-lubricated magazine that caused it. I’m currently saving up some cash to assemble a custom battery for the PDW to bring the rof to real steel spec: 3×3V CR123A (rechargeable surefire batts) which is much smaller than the li-ion cells making the charging handle functional even with the battery installed.

Share This

Comments(2)

Airsoft Gun – M4 CASV 

METAL HOP CHAMBER
7MM gear box
3 pt sling included
Vertical Grip included
330 FPS out of the box
CASV kit is metal

ANPEQ Battery case also Included

Share This

Comments(2)